Print settings

Every printer is different, and your printer might need slightly higher or lower temperature to print correctly. However, these suggested temperatures are a good starting point for the KiwiFil filaments:

PLA pro and rPLA pro:

Nozzle temperature: 210-220°C.
Bed temperature: 50-60°C

rPETG:

Nozzle temperature: 240-250°C.
Bed temperature: 70-85°C


Note that a higher nozzle temperature will give better layer adhesion and a stronger part, while lower nozzle temperature will result in better bridging and less stringing. 
A higher bed temperature may improve bed adhesion.