1.75 mm PLA pro filament

Our PLA filament is manufactured in New Zealand with high quality PLA plastic made from Thai sugarcane. This is not your typical, cheap, brittle PLA. Instead, this is what is often called "PLA pro" or "PLA plus". It prints beautifully and makes strong parts.

Recommended printing temperature is 210-220 deg C, with a bed temperature of 50-60 deg C, but you may find that your specific printer works better at a slightly higher or slightly lower temperature. PLA can also be printed without a heated bed, but a heated bed is recommended for good print adhesion.

147 products
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $5.00 NZD
    $5.00 NZD
    Sold out
  • from $6.00 NZD
    from $6.00 NZD
    Sold out
  • $3.50 NZD
    $3.50 NZD
    Sold out
  • $1.50 NZD
    $1.50 NZD
    Sold out
  • $1.00 NZD
    $1.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $22.00 NZD
    $22.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out
  • $59.00 NZD
    $59.00 NZD
    Sold out